SiCp/2024Al基复合材料的界面行为
柳 培1 ,王爱琴1* ,郝世明2,谢敬佩1
(1.河南科技大学材料科学与工程学院,河南 洛阳 471023;2.河南科技大学 物理工程学院,河南 洛阳471023)
摘 要:采用真空热压烧结工艺在580℃下制备了35%(体积分数)SiCp/2024铝基复合材料,利用透射电镜(TEM )、能谱( EDS)、高分辨透射电镜(HRTEM)对复合材料中SiC/Al,合金相/Al的界面结构进行了表征,研究了增强体SiC和基体Al以及热处理前后合金相与基体Al的界面类型,取向结合机制。结果表明,SiC/Al界面清晰平滑,无界面反应物和颗粒溶解现象,也无空洞缺陷。SiC/Al界面类型包括非晶层界面和干净界面。干净界面中SiC和Al之间没有固定或优先的取向关系,取向结合机制为紧密的原子匹配形成的半共格界面。热压烧结所得复合材料中的合金相以Al4Cu9为主,与基体Al的界面为不共格界面,热处理后,合金相Al2Cu弥散分布于基体中,与基体Al的界面为错配度较小的半共格界面。
关键词:SiCp/Al基复合材料;HREM;界面;位向关系
中图分类号:TF124;O71;TG115.21+5.3 文献标志码:A doi:10.3969/j.1000-6281.2014.04.004
The interfacial condition of SiCp/Al composites
LIU Pei1,WANG Ai-qin1*,HAO Shi-ming2, XIE Jing-pei1
(1.Materials Science and Engineering School of Henan University of Science and Technology, Luoyang Henan 471003;2. Physical Engineering College of Zhengzhou University, Zhengzhou Henan 450052, China)
Abstract:35% SiCp/2024Al composite materials were produced by vacuum hot pressing intering process at 580℃. The interfacial condition of SiC/Al and alloy phase/Al were characterized by TEM, EDS and HREM. The interface types and combination mechanism of SiC/Al, alloy hase/Al before and after heat treatment were investigated. The results show that the SiC/Al interfaces are clear and smooth, and there are no reactant, defect and the phenomenon of particle dissolution. The interface types of SiCp/Al include amorphous layer interface and clean interface. There are no fixed or preferential crystallographic orientation relationships between SiC and Al, and the bination mechanism of them is the closely matching of atoms forming a half coherent interface. The alloy phases after vacuum hot pressing sintering process is mainly Al4Cu9, which form a incoherent interface with Al. After heat treatment, the phases of Al2Cu are dispersed in the matrix, which keep a small mismatch degree half coherent interface with Al.
Keywords:SiCp/Alcomposites;HREM;interface;orientation relationships
全文请到中国知网、万方数据和维普数据等数据库网站中下载!
[1] Shao Y F, Xi Q F, Bernd L, et a1.Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites[J]. Composites Part B:Engineering, 2008,39(6):933-961.
[2] Omyma E K, Fathy A. Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites[J]. Materials and Design,2014,54:348-353.
[3] Xiong B, Xu Z, Yan Q, et al. Effects of SiC volume fraction and aluminum particulate size on interfacial reactions in SiC nanoparticulate reinforced aluminum matrix composites[J]. Journal of Alloys and Compounds,2011, 509:1187-91.
[4] El-Daly A A, Abdelhameed M, Hashish M, et al. Synthesis of Al/SiC nanocomposite and evaluation of its mechanical properties using pulse echo overlap method[J]. Journal of Alloys and Compounds,2012,542:51-58.
[5] Xu X J, Zhang X H, Wang L, et al. Development and Application of medium/low volume-fraction SiCp/Al composites in aerospace field[J]. Aerospace Materials and Technology,2011,41(3) 5-7.
[6] Mohammad M G, Farshad A. Effect of nanosized SiC particles addition to CP Al and Al-Mg powders on their compaction behavior[J]. Powder Technology,2013,245:126-133.
[7] Geng L, Wu K, Yao G K. SiC-Al interface crystallographic orientation relationship in a squeeze-cast SiCw/Al composite[J]. Materials Characterization, 1995, 34(4): 227-229
[8]Durbadal M, Srinath V. Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite[J].Materials Characterization, 2013, 85: 73-81.
[9] 隋贤栋,罗承萍,欧阳柳章. SiCp/ZLl09复合材料中SiC的界面行为[J].复合材料学报, 2000,(01) 65-70.
[10] 樊建中. 粉末冶金SiCp/Al复合材料的界面状况与变形行为[D].哈尔滨:哈尔滨工业大学,1997.
[11] Arsenault R J. The fracture mode in SiC/Al composites[J]. Materials Science and Engineering, 1991, 138:227-235
[12]罗承萍,隋贤栋,欧阳柳章. SiCp/Al-Si复合材料中SiC/Al的晶体学位向关系[J]. 金属学报,1999, 35(4):343-347.
[13] 程南璞,曾苏民,李萍,等. SiCp/Al 复合材料热处理及统计分析[J]. 材料热处理学报,2007, 28(5):15-19.
[14] Yuan W H, An B L. Effect of heat treatment on microstructure and mechanical property of extruded 7090/SiCp composite[J]. Transactions of Nonferrous Metals Society of China, 2012,(22):2080-2086.
[15] Ridvan Y, Erdem K, Adalet Z, et al. Effect of heat treatment on the tribological properties of Al–Cu–Mg/nanoSiC composites[J]. Materials and Design,2013, 49:820–825.